Inden Design Mercedes C63 AMG Black - Uses only original AMG parts.

Mercedes C63 AMG Black

Inden Design Tuning makes its own Mercedes C63 AMG Black.

Inden Design is putting enormous effort into achieving such conversions (Mercedes C63 AMG Black).  Relevant expert circles recognize and appreciate these efforts.  First, the aforementioned vehicle was completely dismantled and the original chassis replaced with a KW Club Sport helical suspension.  After that, the rear side parts of the body were removed in order to precisely match the original side parts of the Black series.

As expected, Joe Inden spared no hard work and dismantled the doors, trunk lid, and even all the hinges to carefully cover the interior door and trunk frames.  The front and rear bumpers, side sills on the right and left, both fenders, as well as the bonnet - exclusively original AMG Black Series parts - were also coated separately.

Conversion with original AMG parts

Renovation works are proportionately important.  The base vehicle is seen completely dismantled.  Then a new KW coilover kit, Club Sport, replaced the standard suspension.  Then the rear side parts of the bodywork removed!  and the original Black Series side parts inserted and mounted with precision.  The front and rear bumpers, the right and left side skirts, the fenders on both sides and the bonnet were also migrated to the base model as original AMG Black Series parts.  Front and rear parking sensors as well as the radar module have also been integrated into the aprons, which are not available on an original black series.

Outside

The original carbon spoiler and carbon flaps are not missing on the front bumper.  The rear counterpart has the carbon rear diffuser, all original interior parts and the grille!  including top model mounts and Black Series tailpipes.  Of course, the original reinforcements and supports of the Black Series side skirts are also attached to the body!  and the skirts including the carbon application are fitted.  Black Series fenders and Black Series hood with ventilation opening already installed.  Once the taillights are installed, all interior wheel arches and base panels replaced with the original black series ones.  Finally, the carbon rear spoiler was fitted and sealed.  Of course, all parts were painted separately before assembly.

19-inch rims complete the conversion

To complete the conversion!  the widened wheel arches fitted with one-piece BBS-F1 light alloy rims.  With a satin black finish with a shiny turned edge.  8.75 × 19 inch rims with Michelin Sport 245 / 35R19 tires now rotate on the front axle.  12.0 × 19 rims with 305/30 tires installed on the rear axle.  15mm spacers on both axles put the new wheels in the spotlight.  Inden Design official website